Sunlit Energy logo

Low-carbon home heating

Efficient heat pumps, designed around your home

Move from fossil-fuel heating to a carefully sized air-to-water system for comfortable rooms and dependable hot water.

£7,500 grant available

Up to £9,000 for qualifying off-gas oil or LPG properties until 31 March 2027

  • A system designed around your home's heat loss
  • Heating, hot water and controls considered together
  • Free enquiry with no obligation to proceed
Get your heat-pump quote Takes under 2 minutes
Representative air source heat pump and hot-water cylinder system

Representative system

A+++
highest declared aroTHERM plus efficiency class
3.5–12 kW
aroTHERM plus output range
Up to 7 years
manufacturer guarantee, subject to terms
0% VAT
qualifying installations through March 2027

System options

Heat pump and hot water, considered as one system

The outdoor unit is only one part of a successful installation. Output, cylinder, controls, emitters and pipework all need to work together, so the final specification is confirmed after a property assessment.

Vaillant aroTHERM plus outdoor air source heat pump

Air-to-water heat pump

Vaillant aroTHERM plus

A compact outdoor unit that uses energy from the air to supply space heating and hot water through a correctly designed wet heating system.

  • Available in 3.5, 5, 7, 10 and 12 kW outputs
  • A+++ rated at its highest declared efficiency class
  • Natural refrigerant and suitable for retrofit or new-build projects
  • Standard guarantee with extensions available subject to installer and registration terms
Vaillant uniSTOR heat pump cylinder range

Matched hot-water cylinder

Vaillant uniSTOR

A high-recovery cylinder designed to work with Vaillant heat pumps, storing domestic hot water while helping the complete system transfer heat efficiently.

  • Options for different household hot-water requirements
  • Large coil surface area supports effective heat transfer
  • Insulated stainless-steel cylinder construction
  • Standard, slimline and selected pre-plumbed configurations

Product imagery and model specifications are sourced from Vaillant UK. Availability, output, guarantee and final equipment selection depend on the surveyed property and the appointed installer.

Boiler Upgrade Scheme

£7,500

towards an eligible air-to-water heat pump

Government support can reduce the upfront cost

The Boiler Upgrade Scheme is installer-led. For eligible properties in England and Wales, an MCS-certified installer applies for and redeems the voucher on the property owner's behalf.

  • £7,500 for eligible air-to-water heat-pump installations
  • £9,000 for qualifying off-gas properties replacing oil or LPG until 31 March 2027
  • Eligibility and scheme requirements are checked before any claim is made

Why consider a heat pump?

A different way to heat your home

Efficient electric heating

A heat pump moves existing energy instead of creating all its heat directly, so a well-designed system can deliver several units of heat per unit of electricity.

No on-site fossil-fuel combustion

An all-electric heat pump heats the home without burning gas or oil at the property, removing the need for a boiler flue or fuel deliveries.

Steady, even comfort

Heat pumps usually run for longer at lower water temperatures, maintaining a more consistent indoor temperature when designed and controlled correctly.

A heating specialist measuring a radiator during a home heat-pump assessment

Property suitability

The survey is where good performance begins

Heat pumps are not selected from bedrooms alone. The design should account for how the building loses heat and how every part of the system will deliver comfort.

Heat loss and insulation

Room-by-room heat loss determines the output needed. Insulation improvements can reduce demand, but older homes are not automatically excluded.

Radiators and flow temperature

Some radiators may already be suitable; others may need resizing so rooms stay comfortable at lower water temperatures.

Outdoor position and sound

The survey checks clearances, airflow, pipe routes and the acoustic impact of the proposed outdoor location.

Hot water and electrics

Cylinder capacity, household demand, controls and the electrical supply are considered as one complete system.

From enquiry to installation

A clear three-step route to the right system

  1. 01

    Tell us about the property

    Share the current fuel, property type, bedrooms and postcode in the short quote journey.

  2. 02

    Survey and system design

    A specialist reviews heat loss, emitters, hot-water demand, outdoor position and electrical requirements.

  3. 03

    Confirm the installation

    You receive the proposed equipment and scope before agreeing a suitable installation date.

Heat pump or boiler?

Similar job, different approach

Both systems can provide a warm home, but they behave differently. A heat pump works best when the building, emitters and controls are designed as one low-temperature system.

An air source heat pump installed outside a brick home
ComparisonAir-to-water heat pumpGas boiler
How heat is producedMoves heat from outside airBurns gas at the property
Typical operating styleLonger, steadier, lower-temperature cyclesShorter, hotter cycles
Hot-water storageUsually uses a cylinderCombi systems may heat water on demand
On-site combustionNoneGas combustion and a flue
Design priorityHeat loss, emitters and controlsBoiler output and hot-water demand

Heat-pump FAQs

Straight answers before you request a survey

These are the practical questions that shape suitability, system design and the final installation scope.

Is a heat pump right for your home?

Tell us how the property is heated and used. We’ll review the details and explain the most sensible next step.

Get a free heat-pump quote

Free enquiry · No obligation

Explore other solutions